TCS - The Drying Experts logo
Home / Products / Clean Room Accessories / Apron Rack
This page shows indicative specifications. Final configuration and a detailed datasheet are confirmed with TCS engineering before order.
Clean Room Accessories / GA-602

Apron Rack

SS rack for hygienic storage of aprons and gowning garments.

Configured to Process RequirementSS304 / SS316 ConstructionxGMP-Aware Build
Request a QuoteDownload Brochure
TCSTCSTCSTCSTCSTCSTCSTCSTCSTCS
IMAGE PLACEHOLDERApron Rack — product photo to be supplied
SEC. 01 — PRODUCT OVERVIEWTCS / APRON RACK / GA-602

The Apron Rack provides hygienic, organised hanging storage for aprons and gowning garments inside a clean-room change area, built in stainless steel to the same cleanable-finish standard as adjacent process equipment.

SEC. 02 — WORKING PRINCIPLETCS / APRON RACK / GA-602
TCSTCSTCSTCSTCSTCSTCSTCSTCSTCS
DIAGRAM PLACEHOLDERCross-section / working-principle diagram to be supplied
  1. 01Exact working sequence is confirmed against the customer's process datasheet at order stage.
SEC. 03 — APPLICATIONS & INDUSTRIES SERVEDTCS / APRON RACK / GA-602

Typical Applications

Garment storage in gowning areas

Industries Served

APIFormulationsFood Processing
SEC. 04 — PROCESS INTEGRATIONTCS / APRON RACK / GA-602

Where Apron Rack sits in a typical process line

Gowning Area→Apron Rack Storage→Clean Room Entry
SEC. 05 — KEY FEATURESTCS / APRON RACK / GA-602
01

SS304 / SS316 Construction

Material of construction selected per product sensitivity and customer specification.

02

Configured to Process Requirement

Capacity, drive and instrumentation sized against the confirmed process datasheet.

SEC. 06 — ADVANTAGESTCS / APRON RACK / GA-602

Built In-House

Designed, fabricated and tested at the Jeedimetla facility, not outsourced.

Direct After-Sales Support

Spares and service supplied directly by the original manufacturer.

SEC. 07 — TECHNICAL SPECIFICATIONSTCS / APRON RACK / GA-602
ModelNo. of HooksDimensions (mm)MOCFinish
TCS-AR-1212900×300×1200SS304Matte
Indicative figures only — final GA drawing and datasheet issued at order confirmation. Subject to process requirement.
SEC. 08 — CONSTRUCTION DETAILSTCS / APRON RACK / GA-602
  • Contact PartsSS304 or SS316 as specified, finished to a cleanable standard.
  • Drive / UtilitySized to the confirmed capacity and duty cycle.
SEC. 09 — OPTIONAL FEATURESTCS / APRON RACK / GA-602
PLC-based controls with data loggingDQ / IQ / OQ documentation packageExplosion-proof electricals (where applicable)
SEC. 10 — COMPLIANCETCS / APRON RACK / GA-602

Designed with cGMP and xGMP principles in mind

Construction practices are intended to align with commonly accepted xGMP expectations for pharmaceutical process equipment — crevice-free welding, cleanable surfaces and appropriate contact-part finishing. TCS does not issue regulatory certification; compliance of installed equipment within a specific facility is subject to the customer's own validation and regulatory process. Subject to process requirement.

SEC. 11 — FREQUENTLY ASKED QUESTIONSTCS / APRON RACK / GA-602
Is it wall-mounted or freestanding?

Both wall-mounted and freestanding configurations are available.

Can hook count be customised?

Yes, hook count and spacing are configured to the room's headcount.

Is it suitable for wash-down cleaning?

Yes, the welded SS construction supports routine wash-down cleaning.

SEC. 12 — DOWNLOADSTCS / APRON RACK / GA-602
PDF

Product Brochure

PLACEHOLDER — brochure file to be attached

GA

GA Drawing

PLACEHOLDER — general arrangement drawing to be attached

DS

Technical Datasheet

PLACEHOLDER — datasheet to be attached

Get a sizing recommendation for your batch.

Share your material, target capacity and process requirement — a TCS engineer will respond directly.

Request a Quote