TCS - The Drying Experts logo
Home / Products / Clean Room Accessories / Cross Over Bench
This page shows indicative specifications. Final configuration and a detailed datasheet are confirmed with TCS engineering before order.
Clean Room Accessories / GA-601

Cross Over Bench

A clean-room entry bench separating the 'dirty' and 'clean' sides of a changing area.

Configured to Process RequirementSS304 / SS316 ConstructionxGMP-Aware Build
Request a QuoteDownload Brochure
TCSTCSTCSTCSTCSTCSTCSTCSTCSTCS
IMAGE PLACEHOLDERCross Over Bench — product photo to be supplied
SEC. 01 — PRODUCT OVERVIEWTCS / CROSS OVER BENCH / GA-601

The Cross Over Bench physically separates the 'dirty' and 'clean' sides of a gowning area, requiring personnel to sit and swing their legs over the bench while changing footwear — a simple, reliable way to enforce correct gowning sequence.

SEC. 02 — WORKING PRINCIPLETCS / CROSS OVER BENCH / GA-601
TCSTCSTCSTCSTCSTCSTCSTCSTCSTCS
DIAGRAM PLACEHOLDERCross-section / working-principle diagram to be supplied
  1. 01Exact working sequence is confirmed against the customer's process datasheet at order stage.
SEC. 03 — APPLICATIONS & INDUSTRIES SERVEDTCS / CROSS OVER BENCH / GA-601

Typical Applications

Gowning room entry controlFootwear changeover separation

Industries Served

APIFormulationsFood Processing
SEC. 04 — PROCESS INTEGRATIONTCS / CROSS OVER BENCH / GA-601

Where Cross Over Bench sits in a typical process line

Uncontrolled Area→Cross Over Bench→Clean Room
SEC. 05 — KEY FEATURESTCS / CROSS OVER BENCH / GA-601
01

SS304 / SS316 Construction

Material of construction selected per product sensitivity and customer specification.

02

Configured to Process Requirement

Capacity, drive and instrumentation sized against the confirmed process datasheet.

SEC. 06 — ADVANTAGESTCS / CROSS OVER BENCH / GA-601

Built In-House

Designed, fabricated and tested at the Jeedimetla facility, not outsourced.

Direct After-Sales Support

Spares and service supplied directly by the original manufacturer.

SEC. 07 — TECHNICAL SPECIFICATIONSTCS / CROSS OVER BENCH / GA-601
ModelLength (mm)Height (mm)MOCFinish
TCS-COB-12001200450SS304Matte / Mirror
Indicative figures only — final GA drawing and datasheet issued at order confirmation. Subject to process requirement.
SEC. 08 — CONSTRUCTION DETAILSTCS / CROSS OVER BENCH / GA-601
  • Contact PartsSS304 or SS316 as specified, finished to a cleanable standard.
  • Drive / UtilitySized to the confirmed capacity and duty cycle.
SEC. 09 — OPTIONAL FEATURESTCS / CROSS OVER BENCH / GA-601
PLC-based controls with data loggingDQ / IQ / OQ documentation packageExplosion-proof electricals (where applicable)
SEC. 10 — COMPLIANCETCS / CROSS OVER BENCH / GA-601

Designed with cGMP and xGMP principles in mind

Construction practices are intended to align with commonly accepted xGMP expectations for pharmaceutical process equipment — crevice-free welding, cleanable surfaces and appropriate contact-part finishing. TCS does not issue regulatory certification; compliance of installed equipment within a specific facility is subject to the customer's own validation and regulatory process. Subject to process requirement.

SEC. 11 — FREQUENTLY ASKED QUESTIONSTCS / CROSS OVER BENCH / GA-601
Can the bench include shoe storage below?

Yes, an under-bench shoe storage shelf or rack is available as an optional configuration.

What finish is standard?

Matte finish is standard; mirror finish is available on request.

Can length be customised to room width?

Yes, length is configured to the gowning room layout.

SEC. 12 — DOWNLOADSTCS / CROSS OVER BENCH / GA-601
PDF

Product Brochure

PLACEHOLDER — brochure file to be attached

GA

GA Drawing

PLACEHOLDER — general arrangement drawing to be attached

DS

Technical Datasheet

PLACEHOLDER — datasheet to be attached

Get a sizing recommendation for your batch.

Share your material, target capacity and process requirement — a TCS engineer will respond directly.

Request a Quote